|
Child Level:
| |
InRoads Set up Plan
...for the KHA SD Roadway Group
1st Primary Goal:
Get InRoads set up for CalTrans Standards
Engineering/Modeling Settings
For example:
Superelevation tables, design checks, HDM Settings where applicable.
Graphics
Sheet settings, all graphic representation of the engineering, labels...
Two "Aspects" of this Graphics Standards Conformance:
- Physical Characteristics (location, orientation, size, spacing (as in
contours and grids)).
- Symbology (level, color, weight, style, font, etc.).
Current Plan
Assign folks to make sure specific commands in InRoads provide
CalTrans-compliant Physical Characteristics (Symbology can be deferred for now).
Here are instructions for how to work:
Deadlines:
On Wednesday, Dec. 12, I'll QC and synthesize everything I will have received
into a new .xin. Feel free to send me stuff prior to that.
Background:
An "infrastructure" for the symbology has been set up (Level
libraries, Text
Styles and Named Symbologies
using them) and provide a good start.
Symbology will be changing a bit as we determine the specifics of
our Enhanced Productivity Superset. As long as we consistently use
Named Symbologies in our Command preferences, we can easily update the
symbology as the definition solidifies.
Jeff's first pass through the commands in InRoads was to assign an
appropriate Named Symbology to every element InRoads places. The
Named Symbologies attributes were set up for "Bylevel" rather than
hardcoding the colors, weight, etc. Assuming the level library
were set up properly a large fraction of the elements should look good.
The remainder probably need to be hard coded as appropriate.
Jeff's first pass set up a bit of the Physical Characteristics,
but not much.
Here's the Command List. |
